Table of Contents
Advertisement
How to assemble your monitor hardware
• If the computer is turned on you must turn it off before continuing.
Do not plug-in or turn-on the power to the monitor until instructed to do so.
• Avoid finger pressure on the screen surface.
• The supported timing may vary by input signal. Download
support on page
1. Attach the monitor base.
Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or a
mouse will crack the glass or damage the LCD substrate voiding your warranty. Sliding or scraping the monitor
around on your desk will scratch or damage the monitor surround and controls.
Protect the monitor and screen by clearing a flat open
area on your desk and placing a soft item like the
monitor packaging bag on the desk for padding.
Gently lay the screen face down on a flat clean padded
surface.
Attach the monitor stand to the monitor base as
illustrated.
Tighten the thumbscrew on the bottom of the monitor
base as illustrated.
3). Refer to "
Preset display modes
from the website (see
Resolution file
" in
for more information.
Resolution file
How to assemble your monitor hardware
Product
1
2
13
Advertisement
Table of Contents
Need help?
Do you have a question about the AQCOLOR DesignVue PD Series and is the answer not in the manual?
Questions and answers