BenQ AQCOLOR DesignVue PD Series User Manual page 49

Item
Sets the function to be accessed by custom key 1.
Custom Key
1
Sets the function to be accessed by custom key 2.
Custom Key
2
Sets the function to be accessed by custom key 3.
Custom Key
3
Allows data transmission while multiple monitors are
MST
daisy-chained.
Allows the monitor settings to be set through the software
DDC/CI
on the PC.
When this function is activated, DP port will be in the
DP Auto
Switch input auto select loop. Otherwise, DP can only be selected
by input select or by hot key.
When this function is activated, HDMI port will be in the
HDMI Auto
input auto select loop. Otherwise, HDMI can only be
Switch
selected by input select or by hot key.
Sets the time to power off the monitor automatically in
Auto Power
Off power saving mode.
Sets whether to display the resolution notice of the
Resolution
Notice recommended resolution when a new input source is
detected by the monitor.
DDC/CI, short for Display Data Channel/Command Interface,
which was developed by Video Electronics Standards Association
(VESA). DDC/CI capability allows monitor controls to be sent via
the software for remote diagnostics.
Function Range
•
Picture Mode
•
Input
•
DisplayPort
•
USB-C
•
HDMI
•
Rec. 709
•
sRGB
•
CAD / CAM
• Animation
•
M-book
•
Low Blue Light
•
Darkroom
•
Brightness
• DualView
•
KVM Switch
•
Contrast
•
Volume
•
Mute
•
ON
•
OFF
•
ON
•
OFF
•
ON
•
OFF
•
ON
•
OFF
•
OFF
•
10min.
•
20min.
•
30min.
•
ON
•
OFF
Navigating the main menu 49