DeWalt DCD716 Original Instructions Manual page 27

12 V CORDLESS ADJUSTABLE CLUTCH DRILL/DRIVER/
HAMMERDRILL
DCD716
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Peak
Rated
Type
Battery type
No-load speed:
1st gear
2nd gear
Impact rate
1st gear
2nd gear
Max torque (hard/soft)
Power output (MWO)
Chuck capacity
Maximum drilling capacity:
Wood
Metal
Masonry
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN60745-2-1:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Drilling into metal
Vibration emission value a =
h,D
Uncertainty K =
Impact drilling
Vibration emission value a =
h,ID
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN60745 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WALT one of the
e
DCD716
V 12
DC
V 10.8
DC
1
Li-Ion
min -1 0–400
min -1 0–1500
EC-Declaration of Conformity
Machinery Directive
min -1 0-6000
min -1 0-22500
Nm 30/16
W 180
12V Cordless Adjustable Clutch
mm 10
Drill/Driver/Hammerdrill
DCD716
mm 20 D WALT declares that these products described under
e
Technical Data are in compliance with:
mm 10
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-1:2010,
mm 8
EN60745-2-2:2010.
kg 0.98
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
dB(A) 85.5
file and makes this declaration on behalf of D
dB(A) 96.5
dB(A) 3
Markus Rompel
m/s 2 <2.5
Vice President of Engineering, PTE-Europe
m/s 2 1.5
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
m/s 2 10.1
20.03.2019
m/s 2 1.5
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
WARNING: To reduce the risk of injury, read the
instruction manual.
EnGLIsh
WALT at
e
WALT.
e
25