Special Safety Instructions - Phoenix Mecano RK Rose+Krieger Multilift II Assembly Instructions Manual

Safety
Hide thumbs Also See for RK Rose+Krieger Multilift II:
Table of Contents

Advertisement

Available languages

Available languages

5.2 Special safety instructions

Work with the lifting column may only take place in accordance with these instructions.
The device may only be opened by authorized specialist personnel. If there is a fault with the
lifting column, we recommend that you contact the manufacturer or send this lifting column
for repair.
Unauthorized conversions of or changes to the lifting column are not permitted for safety
reasons.
The push and pull forces and torque loading of these lifting columns specified by RK
Rose+Krieger GmbH must not be exceeded.
The type plate must remain legible. It must be possible to identify the ratings data effortlessly
at any time.
Safety-relevant hazard symbols identify danger areas on the product.
The electric adjustment drive is not a toy for children! Unsupervised actuation of the drive is
forbidden.
Incorrect use of the application area of the single drive agreed and approved between the
manufacturer and customer is also unauthorised!
The end product of the re-user must not present a danger to persons. Danger points
on the end product of the re-user must be reduced to a minimum constructively. Dan-
ger points must be marked.
Safety-relevant devices must be inspected at regular intervals, but at least once a year, for proper function,
damage and completeness.
5. Safety
33

Advertisement

Chapters

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RK Rose+Krieger Multilift II and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents