General Notes; Notes On These Assembly Instructions - Phoenix Mecano RK Rose+Krieger Multilift II Assembly Instructions Manual

2. General notes

2.1 Information about these assembly instructions
These assembly instructions are only applicable to the lifting columns described and are intended as doc-
umentation for the manufacturer of the end product into which this partly completed machine is incor-
porated.
We wish to explicitly point out that the manufacturer of the end product must produce operating instruc-
tions for the end user containing all the functions and hazard warnings of the end product.
This also applies to installation in a machine. In this case, the manufacturer of the machine is responsible
for the relevant safety devices, checks, monitoring potential crushing and shearing points and the docu-
mentation.
These assembly instructions will help you,
•
to avoid hazards,
•
to prevent downtime,
•
and to guarantee and increase the lifetime of this product.
Hazards warnings, safety regulations and the information in these assembly instructions are to be ob-
served at all times.
These assembly instructions must be read and applied by everyone who works with the product.
Commissioning is forbidden until the machine complies with the provisions of EC Directive 2006/42/EC
(Machinery Directive). Before bringing onto the market, this must comply with the CE Directives, including
documentation.
We hereby inform any re-user of this partially completed machine/partial machine/machine parts explicitly
of its obligation to expand and complete this documentation. In particular, when installing or attaching
electrical components and/or drives, the re-user is to complete a CE declaration of conformity.
Our declaration of incorporation becomes invalid automatically.
28