Stop And Start System; Stop And Start System Operation - Yamaha NMAX 155 Owner's Manual

Stop and Start System

Stop and Start System
5
1. Stop and Start System indicator light "
The Stop and Start System is a system
that stops the engine automatically
when the vehicle is stopped while the
Stop and Start System indicator light is
on to prevent noise, control exhaust
emissions, and reduce fuel consump-
tion.
When the rider turns the throttle grip
slightly, the engine restarts automati-
cally and the vehicle starts off.
NOTICE
When parking the vehicle or leaving
the vehicle unattended, be sure to
turn the main switch off. If the Stop
and Start System is left turned on,
the battery could become dis-
EAU76824
charged and it may not be possible
to restart the engine due to insuffi-
cient battery voltage.
TIP
 Although the engine normally
stops at the same time the vehicle
is stopped, it may take a while un-
til the engine stops when operat-
ing the vehicle under 10 km/h
such as in heavy traffic.
A "
 If you think the battery voltage has
decreased because the engine
cannot be started using the starter
switch or for some other reason,
do not turn on the Stop and Start
System.
 Have a Yamaha dealer check the
battery at the intervals specified in
the periodic maintenance chart.
ECA23961
Stop and Start System opera-
tion
Activating the Stop and Start Sys-
tem
1. Turn the main switch on.
2. Set the Stop and Start System
5-1
switch to " ".
A
A
EAU76671
EAU76685