Advertisement
Important:
Read this instruction manual carefully and mind all warnings and tips. You should do this work
only if you're qualified; otherwise we recommend this mounting to be done by a qualified
workshop. Improperly mounting of this kit can reduce the driveability of the motorcycle and may
be a risk to your health and life.
Special works are marked with the following signs. Please take special care on these works.
Warning! Important mounting instruction. It shows risks to your life and health.
Tips for mounting and maintenance or to avoid damage.
Fitting:
Mounted conversion kit
————————————————
Date: 05/06/2008
Article-No. : 150H074
Product : Tour Match Kit
Vehicle-Manufacturer : Honda
Model (Type) : CBR 1100XX (SC35A)
Accessories from
Fitting Instruction
The Original
—
2001
——
Page 1 of 2
Advertisement
Table of Contents
Related Manuals for LSL 150H074
Summary of Contents for LSL 150H074
- Page 1 Fitting Instruction Article-No. : 150H074 Product : Tour Match Kit Vehicle-Manufacturer : Honda Model (Type) : CBR 1100XX (SC35A) 2001 Important: Read this instruction manual carefully and mind all warnings and tips. You should do this work only if you‘re qualified; otherwise we recommend this mounting to be done by a qualified workshop.
- Page 2 The battery ground should be disconnected before working on electric wiring and switches! Remove handlebar controls, clutch and brake cylinder assy, then remove the original clip-ons. Mount Tour-Match clamps instead, align them and tighten them slightly. Now install the tubes with M6x22 and tighten these bolts with 10Nm (7.31lbf ft).
Need help?
Do you have a question about the 150H074 and is the answer not in the manual?
Questions and answers