Lubrication - Janome QMP16SU Manual

4. Lubrication

Janome QMP16SU Lubrication Specifications
Rep Lube Kit Part# QM49262
Lubricant Type
1. Kluber, Constant OY68 (Red)
2. Kluber, Mikrozella G 8 OY (Blue)
3. Kluber, GLY 2100 (Yellow)
4. Kluber, NCA 15, Isoflex (Green)
5. Kluber, GLY 151, Polylub (Orange)
6. Conoco, Hydroclear R&O 32 (Purple)
or similar white oil, i.e. Texaco 22, or
Velocite 10
Janome Lubricant Order Numbers
#1 Red OY 68
#2 Blue Mikrozella G 8 OY
#3 Yellow GLY 2100
#4 Green IsoFlex NCA-15
#5 Orange GLY 151
#6 Purple Texaco 22, hook race only
All the above in box w/ booklet
Janome QMP16SU Lubricating Schedule
The Janome QMP16SU should be lubricated every one to two years to ensure top mechanical performance.
Routine Oiling of the Race
The quilter should apply one drop of oil from the EZ Oiler they
received with their machine (Lube #6 [Purple]), to the raceway of
the bobbin case with each bobbin change. After oiling the hook, it
is recommended that the quilter sew on scrap material for a few
seconds before resuming the quilting to ensure no oil stains the quilt.
16 |
www.Janome.com
Machine Components
All main bearings
Main bearing reservoirs
Take-up lever, articulating link and needle bar driver
Take-up caged needle bearings
Presser bar guide and plunger, lifting link and Pitman
eccentric
Hook race
Replacement Lube
Replacement Lube
Replacement Lube
Replacement Lube
Replacement Lube
Replacement Lube
Retailer Lube Kit Box
#1 Red: QM49301
#2 Blue: QM49302
#3 Yellow: QM49303
#4 Green: QM49304
#5 Orange: QM49305
#6 Purple: QM49306
#1-#6 Kit QM49262