Do you have a question about the JEM GOLD 660 and is the answer not in the manual?
Questions and answers
Renee
April 20, 2025
Bobbin post spinning but not winding threa
1 comments:
Mr. Anderson
May 10, 2025
The bobbin post may be spinning but not winding thread on the Janome JEM GOLD 660 if the machine is not properly set to bobbin winding mode. If it uses a push-pull system, the handwheel must be pulled out to disengage the needle mechanism and engage the bobbin winder. If this step is skipped, the motor may run without winding the bobbin.
This answer is automatically generated
cinda
February 19, 2025
where is the stretch stitch
1 comments:
Mr. Anderson
February 19, 2025
The Janome Jem Gold 660 has 8 stitches, including 2 stretch stitches. However, the specific location or selection method for the stretch stitches is not detailed in the provided information. You may need to refer to the machine's manual or consult a Janome dealer for exact details.
Need help?
Do you have a question about the JEM GOLD 660 and is the answer not in the manual?
Questions and answers
Bobbin post spinning but not winding threa
The bobbin post may be spinning but not winding thread on the Janome JEM GOLD 660 if the machine is not properly set to bobbin winding mode. If it uses a push-pull system, the handwheel must be pulled out to disengage the needle mechanism and engage the bobbin winder. If this step is skipped, the motor may run without winding the bobbin.
This answer is automatically generated
where is the stretch stitch
The Janome Jem Gold 660 has 8 stitches, including 2 stretch stitches. However, the specific location or selection method for the stretch stitches is not detailed in the provided information. You may need to refer to the machine's manual or consult a Janome dealer for exact details.
This answer is automatically generated