Janome QMP16SU Manual page 13

QMP16SU CABLES
3. QM20013-01 CABLE-USB A F TO 5X2 HDR E 25M
(internal short RHB connection cable)
Internal rear handlebar connection cable from rear of
machine to control board at the back right side of
the machine, inside the front cover.
4. QM20015 CABLE-PS Ring to 2 pin Control
Cable from power supply rings to the 2 pin connection
on the control board inside the front cover, located at the
right rear of the machine.
5. QM20142 CABLE-LED RING SD
Front light ring small connection to the control board
larger connection at the right rear of the machine - inside
the front cover.
6. QM20204 CABLE-POWER SWITCH SW.
Jumps the power supply switch on the power supply, the
machine will not power up without this jumper.
| 13
QMP16SU Service Manual