Qmp16Su Cables - Janome QMP16SU Manual

QMP16SU CABLES

1. QM20006 CABLE-USBA-RA TO MIB-RA 8" (front handle bar connection cable)
2. QM20013 CABLE-USB A F TO 5X2 HDR E 25M (internal long fhb connection cable)
3. QM20013-01 CABLE-USB A F TO 5X2 HDR F 25M (internal short rhb connection cable)
4. QM20015 CABLE-PS RING TO 2 PIN CONTROL
5. QM20142 CABLE-LED RING SD
6. QM20204 CABLE-POWER SWITCH SW.
7. QM20795 CABLE-TERMINATOR 18 (SR cable)
8. QM21852 CABLE-GND SIGNAL-EARTH 24
9. QM21868 CABLE-CPOD TO DRIVER 18E
10. QM22007 CABLE-DC POWER CPOD TO DRIVER OEM2
11. QM22463 CABLE-ENCODER DISK 18/24
1. QM20006 CABLE-USBA-RA TO MIB-RA 8"
(front handle bar connection cable)
External front handlebar connection cable from the
handlebar to the front left side of the machine.
2. QM20013 CABLE-USB A F TO 5X2 HDR E 25M
(internal long FHB connection cable)
Internal front handlebar cable from front left of
machine to the control board at the back right side of
the machine, inside the front cover.
12 |
www.Janome.com