*1:This feature is only available on some models.
Tube Connector and Clip*1
Tube Connector and Valve*1
Removing the Doors
If your entrance door is too narrow for the
appliance to pass through, remove the appliance
doors and pass the appliance laterally.
• Disconnect the power cord, house fuse or
circuit breaker before installing or servicing the
appliance. Failure to follow these instructions
may result in death, fire or electric shock.
Removing the Freezer Door
The water supply line is connected to the top
right part in the back of the appliance. Remove
the connected water tube by pressing the
collet towards the tube connector.
Remove the screw of the hinge cover on top of
the appliance by rotating it counterclockwise.
Pull out the water supply line a. Disconnect
all wire harnesses b. Unscrew the ground
Rotate the hinge lever d counterclockwise.
Lift the top hinge e free of the hinge lever
• When lifting the hinge free of the latch, be
careful that the door does not fall forward. It
is recommended that two or more people
carry out the door removal and refitting.
Remove the door by lifting it off the bottom
• Place the door on a non-scratching surface
with the inner side facing up.