Advertisement
Quick Links
TOYOTA
Preparation
Part Number: PT278-42130
Kit Contents
Item #
Quantity Reqd.
1
1
2
1
3
1
Hardware Bag Contents
Item #
Quantity Reqd.
1
1
2
2
3
1
Additional Items Required For Installation
Item #
Quantity Reqd.
1
2
3
Conflicts
Recommended Tools
Personal & Vehicle
Protection
Safety Glasses
Safety Gloves
Vehicle Protection
Wrist & Belt Buckle
Protection
Special Tools
Installation Tools
Tape Measure (Metric)
Non-Intrusive Infrared Temp
Probe/Gun
Heat Gun
Special Chemicals
Cleaner
General Applicability
Issue: G 12/13/2016
RAV4/HV
Description
Crossbar Assembly Front (long)
Crossbar Assembly Rear (short)
Hardware Bag
Description
Key
Forward Limit Label
Installation Instructions
Description
Notes
Cloth
Notes
Notes
Notes
Approved Cleaner
Page 1 of 6 pages
2013 -
Recommended Sequence of Application
Item #
Accessory
1
2
3
Vehicle Service Parts
Item #
Quantity Reqd.
1
2
3
Legend
STOP: Damage to the vehicle may occur. Do not
proceed until process has been complied with.
OPERATOR SAFETY: Use caution to avoid risk of
injury.
CAUTION: A process that must be carefully observed
in order to reduce the risk of damage to the
accessory/vehicle and to ensure a quality installation.
TOOLS & EQUIPMENT: Used in Figures calls out the
specific tools and equipment recommended for this
process.
REVISION MARK: This mark highlights a change in
installation with respect to previous issue.
SAFETY TORQUE: This mark indicates that torque is
related to safety.
CROSSBAR KIT
*Mandatory
(may be required for reassembly)
Description
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Toyota PT278-42130
Summary of Contents for Toyota PT278-42130
- Page 1 TOYOTA RAV4/HV 2013 - CROSSBAR KIT Preparation Part Number: PT278-42130 Kit Contents Recommended Sequence of Application Item # Quantity Reqd. Description Item # Accessory Crossbar Assembly Front (long) Crossbar Assembly Rear (short) Hardware Bag *Mandatory Hardware Bag Contents Vehicle Service Parts...
- Page 2 Vehicle Disassembly/Reassembly (panel removal, part storage, etc.). Electrical Component Disassembly/Reassembly (battery disconnection, connector removal, etc.). Please see your Toyota dealer for a copy of this document. 1. Affix the Front Crossbar “Forward Limit” Warning Labels to the Side Rails.
- Page 3 TOYOTA RAV4/HV 2013 - CROSSBAR KIT Procedure 3. Install the Front Crossbar. (a) The front crossbar has a “FRONT” sticker on the center of the bar (Fig. 3-1). (b) Install the front crossbar at an angle parallel with the roof surface (Fig. 3-1).
- Page 4 TOYOTA RAV4/HV 2013 - CROSSBAR KIT Procedure 5. Install the Rear Crossbar. (a) Install the rear crossbar at an angle parallel with the roof surface (Fig. 5-1). (1) Slide the 1 support over the side rail. (2) Rotate the 2 support rearward over the side rail.
- Page 5 TOYOTA RAV4/HV 2013 - CROSSBAR KIT Procedure 7. Place the Installation Instructions. (a) Place the Crossbar Installation Instructions and the lever key in the supplied bag and store it in the vehicle’s glove box. Page 5 of 6 pages Issue: G 12/13/2016...
- Page 6 TOYOTA RAV4/HV 2013 - CROSSBAR KIT Checklist - these points MUST be checked to ensure a quality installation. Check: Look For: Accessory Function Checks Ensure crossbars are secure and in correct position Front crossbar should not be forward of Crossbar Installation Instructions/Key warning label.
Need help?
Do you have a question about the PT278-42130 and is the answer not in the manual?
Questions and answers