Vaisala MD30 Setup Manual page 5

Setup Guide
Cabling and Calibration
To complete the MD30 installation, perform the listed steps based on your system type.
Instructions for RoadAI systems
If you are using MD30 through a mobile device (RoadAI), continue with the following instructions in
this order:
• Cabling Bluetooth module enclosure (page 6)
• Pairing Bluetooth module (page 7)
• Calibration step 1: window cleaning (page 9)
• Calibration step 2: plate reference (page 10)
• Calibration step 3: dry road reference (page 12)
• Verifying RoadAI operation (page 14)
Instructions for other data collection systems
If you are using MD30 with some other data collection system, continue with the following instructions
in this order:
• Cabling and data transfer (page 16)
• Calibration step 1: window cleaning (page 18)
• Calibration step 2: plate reference (page 19)
• Calibration step 3: dry road reference (page 21)
M212169EN-D
5