Installation Location - Vaisala MD30 Setup Manual

Setup Guide

Installation location

Sensor location on vehicle
b
a
Installation position suitability
for measurements
Table 1 Sensor location on vehicle
Installation position suitability for
measurements
X Surface state
s
T Surface temperature
s
T Air temperature
a
T Dew point and frost point temperature
d
RH Relative humidity
Install the mobile sensor outside the vehicle. Install the mobile device (phone or tablet), Bluetooth
module, and other equipment and accessories inside the vehicle.
You can detach the surface temperature sensor and air temperature and humidity sensor and install
them separately if needed. See
(page
Depending on the vehicle, you may need to use a custom installation extension.
Make sure that air can flow freely through the hood. This helps to keep the hood clean.
2
b
a
Mounting temperature sensors separately (with optional accessory kit)
4).
c c
d
b
a a
a
Front of Side of
vehicle vehicle
(behind
plow)
++ ++
++ ++
++ +
++ +
++ +
Sensor facing front
b
b c
Back of Under
vehicle vehicle
+ ++
+ +++
− − − −
− −
− − − −
M212169EN-D
d