Vaisala MD30 Setup Manual page 3

Setup Guide
Mounting MD30 on vehicle
h
h = 20 ... 110 cm
[7.87 ... 43.31 in]
Figure 1 Mounting height and angle
1. Fix with M6 × 25 mm screws (min. 3 pcs).
2. Push the sensor to the bracket.
3. Tighten the screws (2 pcs).
4. Remove the cover.
5. To finalize the mounting, apply electric joint compound to the connector between the mobile
sensor and 8-m extension cable.
a
a. Use pliers to remove the orange part from the male connector, apply electric joint
compound, and insert the orange part back.
b. Repeat for the female connector.
c. Apply electric joint compound on top of the female connector.
d. Connect the 8-m (26-ft) extension cable to the mobile sensor.
1
To order electric joint compound (12475SP), see Vaisala Mobile Detector MD30 Maintenance and
Troubleshooting Reference Guide.
b
3
2
c
M212169EN-D
!
4
d
3