Vaisala MD30 Setup Manual page 14

Setup Guide
2. For the sensor that you want to calibrate, go to the RoadAI app, select Set Reference >
Manual Road Reference, and type the 3 values.
Verifying RoadAI operation
14
1 Connect the mobile sensor and mobile device to
the vehicle power outlet. Start the car.
2 In RoadAI mobile app, enable Auto-record.
RoadAI automatically starts recording data when
the mobile device is connected to a charger and
stops when charging is disconnected.
3 In the RoadAI mobile app, check Diagnostics.
Under heading Upload, check that uploading is
ongoing.
4 Log in to the web app at
and check that data is visible.
M212169EN-D
https://map.vionice.io