Vaisala MD30 Setup Manual page 11
Mobile detector
Hide thumbs
Also See for MD30:
- Usage instructions (64 pages) ,
- Reference manual (16 pages) ,
- Setup manual (8 pages)
Advertisement
Setup Guide
4.
Check that the mobile sensor is powered and operational (green LED in the mobile sensor is
blinking).
Check that there are no error messages by scrolling right in the RoadAI app measurement grid.
5.
In RoadAI mobile app, go to the menu and select Set Reference > Plate Reference.
The adjustment takes typically 30 seconds.
If the adjustment is not successful, repeat the procedure.
6.
In the RoadAI mobile app, check that the calibration is successful by checking from errors that
calibration has not been interrupted.
M212169EN-D
11
Advertisement
