Switching Off The Device; Navigating In The Menu - Seca 287 Instruction Manual And Guarantee

Switching off the device

5.3 Navigating in the menu

►
Press the Start key
1. Switch on the device (see "Switching on the device" on page 76).
2. Press the menu key.
The last menu item selected (in this case, Autohold "AHOLd") appears in
the display.
3. Press the arrow key send or print until the desired menu item appears in
the display (in this case: filtering "FIL").
4. Confirm your selection by pressing Enter (input).
The current setting for the menu item or a submenu are displayed (in this
case: level "0").
5. To change the setting or call up a different submenu, press the arrow key
send or print until the desired setting (in this case: level "2") is displayed.
6. Confirm the setting by pressing Enter (input).
You exit the menu automatically.
7. To make more settings, call up the menu again and repeat the process.
NOTE:
• Briefly press the menu key to go back one menu level.
• Press and hold the menu key to exit the menu at any time.
• If no key is pressed for about 24 seconds, you exit the menu
automatically.
of the multifunctional display.
English
Operation • 81