Table of Contents
Advertisement
[A] FIX THE PRODUCT
TO ADJACENT CABINETRY
Note: Ensure the brackets are
flushed with the cabinetry.
Cut off any excess portion
of the brackets.
Using two Ø4 x 25mm screws, secure the product to the adjacent cabinetry
through the brackets located on each side of the product chasis.
18
!9
SECURE THE APPLIANCE
Using two Ø4 x 25mm screws, secure the appliance to the benchtop above
through the brackets located at the top of the appliance chasis.
IMPORTANT!
This installation method is not applicable if an infill bracket has been installed.
If the infill bracket is not used, we recommend to fix the appliance to the
adjacent cabinetry or above the benchtop.
[B] FIX THE APPLIANCE
TO BENCHTOP ABOVE
Hide quick links:
Advertisement
Table of Contents
