Table of Contents
Advertisement
IMPORTANT!
Ensure toe kick does not protrude more than 3 9/16" (90mm) out from the dishwasher to ensure that the visibility of the floor light is not obstructed.
Refit toekick mounting plate and panel.
1
Refit the toekick and mounting plate panels that were removed earlier.
If desired, a custom continuous toekick panel can be installed.
Align and prepare continuous toekick panel.
3
Align the toekick to desired position and mark out the point in which the toekick
meets the base of the door panel. Cut back excess.
!8
TOE KICK INSTALLATION
Check door overhang and swing range.
2
Door overhang and swing range is relative to height and depth of toekick panel.
Cut back excess panel to ensure continuous, seamless integration.
Fit continuous toekick panel to the surrounding cabinetry.
4
Toekick excess
(to be cut back)
Door panel
Toekick
17
Hide quick links:
Advertisement
Table of Contents
