Dishwasher and Ø 38mm Standpipe
max.
4 3/4"
(120mm)
IMPORTANT!
Ensure that drain hose is installed as close to the underside of the benchtop
as possible. This will ensure no waste re-enters the drain hose in the event of
poor flow or a blockage in the plumbing.
Ensure the drain hose does not extend into water retained in the trap.
An air gap is required to prevent waste water from siphoning back into the tub.
16
!7
PLUMBING AND DRAINAGE OPTIONS
IMPORTANT!
Ensure that drain connection complies
with local plumbing regulations.
Screw drain hose support to back wall at
correct height. If space is limited for fixing,
push hose through drain hose support to
required height.
Ø1 1/2"
(38mm)
min. R 8"
(200mm)
Dishwasher using drain hose joiner onto sink trap/waste tee
IMPORTANT!
Ensure that drain connection complies
with local plumbing regulations.
Screw drain hose support to back wall at
correct height. If space is limited for fixing,
push hose through drain hose support to
required height.