Advertisement
Mounting the lamp in suspended ceiling.
Set up the lamp to the suspended ceiling as it is shown bellow (Required opening 110mm):
Step 1
Pass the battery pack into the ceiling then bend the springs, to get into the hole of the suspended
ceiling, as you can see to the next figure.
Figure 1
Step 2
Push up the luminaire, as shown in figure 2.
Figure 2
Step 3
Continue to push upwards until the lamp locks.
Figure 3
NOTE: The length of the battery pack cable is 70 cm.
Page 4 from 6
If you want to pull off the device, put a flat blade
screwdriver, between the device and the ceiling.
CAUTION : Do not view directly with bare eyes.
230V
Ø110mm
230V
230V
923293007_09_001
Advertisement
