Keysight M9485A Startup Manual page 22

Getting Started
STEP 3. Install the Software
Software Installation Procedure
1. Install the Keysight IO Libraries Suite, using either the Keysight IO Libraries
2. Install the network analyzer module software:
3. Complete the installation:
Check for software updates at:
NOTE
Suite CD included with your shipment, or the downloadable file at
www.keysight.com/find/iosuite.
IO libraries.
a. Using either the CD included with your shipment or the downloadable
file at http://www.keysight.com/find/m9485A,
b. Follow the installer prompts.
If Using an Embedded Controller:
a. After the InstallShield Wizard has completed, click Finish.
b. Restart the embedded controller PC, using Start > Restart, and wait for
the system to restart.
If Using a Remote Controller:
a. After the InstallShield Wizard has completed, click Finish.
b. Shut down the remote controller PC, using Start > Shut down.
c. Power down the chassis.
d. Power up the chassis.
e. Power up the remote controller PC.
Follow the installer prompts to install the
http://www.keysight.com/find/m9485A.
22
launch the installer.