Step 3. Install The Software; System Requirements; Hardware Requirements - Keysight M9485A Startup Manual

Pxie vector network analyzer modules
Hide thumbs Also See for M9485A:
Table of Contents

Advertisement

Getting Started

STEP 3. Install the Software

STEP 3. Install the Software

System Requirements

Topic
Operating system
Processor speed
Available memory
Available disk space

Hardware Requirements

Topic
Chassis
Controllers
Embedded controller
Remote controller
Windows 7 and Vista Requirements
Windows 7 (32 bit and 64 bit)
Windows Vista, SP1 and SP2 (32-bit and 64-bit) or
Windows 8.1 (32-bit and 64-bit)
1.5 GHz dual core (x86 or x64) minimum
(2.4 GHz recommended)
4 GB minimum (8 GB recommended)
1.5 GB available hard disk space minimum
Requirements
PXIe or PXI-H chassis slot
PXI or PXI Express embedded controller or remote controller
(external PC connected to the chassis by a PCI-to-PXI
interface) is required.
Keysight M903xA or an equivalent embedded controller that
meets the following requirements:
A PXIe system controller (PXI-1 embedded controllers
are not compatible).
Utilizes a 2x8, 4x4, or 1x8 PXIe system slot link
configuration.
Runs one of the operating systems listed in
Requirements
(above).
(For Keysight M9018A chassis use only) A PC running one of
the operating systems listed in
and a Keysight M9021A Cable Interface x8 with one of the
following PC interface options:
Keysight M9045B PCIe ExpressCard Adaptor x1, with
cable (for a laptop PC)
Keysight M9048B PCIe Desktop Adaptor x8, with cable
(for a desktop PC)
20
System
System Requirements

Advertisement

Table of Contents
loading

Table of Contents