Advertisement
HANDLE BAR & FRONT PEDAL SUPPORTING TUBE COVER
ASSEMBLY
Step 1. Remove the six preassembled screws (E4&E5) from the handle bar (E1).
Step 2. Remove the two preassembled screws (A108) from the main frame (A).
Step 3. Mount the handle bar (E1) onto the
main frame (A) with screws (E4&E5).
Step 4. Mount the front pedal supporting
tube cover (A66&A67) onto the
main frame (A) with two screws (A108).
**Repeat same step to finish right side assembly.
E5
USE TOOL:
E5
E4
A108
A66
A
Attach one end of the adapter into the
power socket and the other end into the input
jack on the main frame like shown.
8
E2
E1
E4
ADAPTER ASSEMBLY
I
A67
A108
Advertisement
