Assembling The Dreamoc Diamond - Realfiction Dreamoc Diamond 4K Assembly Manual

ASSEMBLING THE DREAMOC DIAMOND

Unpacking the display
1. Open the hinges on the transport case, and remove the lid. Then open each side and finish by removing the
front of the case (the side with logo on)
2. Take out the 4 brown boxes (numbered 1, 2, 3 and 4) and set them aside for now.
3. Locate the installation & service toolbox and place it aside. Also Locate the assembly parts toolbox and place it aside
5. If you have ordered magnet skins for internal branding of the display, you will find a white poster tube
inside the transport case holding these.
5