Table of Contents
Advertisement
17. Take out the second picture engine module (screen 2) from the transport case, and lift it in place. Temporarily
secure it with umbraco keys or screwdrivers in the same way as with the previous picture engine module (screen 1).
18. Fasten the second picture engine module using the remaining 4 long bolts.
Important:
When you have mounted the 2 picture engine modules make sure to attach the rubber protectors
on each corner to prevent an injury when further assembling the display.
Attach the light bars
19. Locate the 4 light bars in the plywood box. Mount each of them by first guiding its power cable through the light
bar holder. IMPORTANT! Beware not to hit the picture engine modules, as this could scratch or damage the screens.
11
Advertisement
Table of Contents
