Table of Contents
Advertisement
Grounding the chassis
23. Install the grounding cable to your appropriate electrical installation.
24. Unbundle the power cable and connect to the power outlet. Both picture engine modules and all 4 light
bars will now automatically turn on.
Assembling the center stage platform and side plates
25. Locate the low-level center stage platform in the transport case and lift it in place. If you want to position
your physical object at the high level (standard configuration), make sure that the middle hole in the platform is
pointing upwards.
26. Locate the 2 plywood cross sections and assemble the first one so that the metal pin fits in the middle hole
in the low-level center stage platform. Then lift the second cross section in place.
27. Locate brown box no. 1, containing the 4 lower side plates.
14
Advertisement
Table of Contents
