Table of Contents
Advertisement
1
Stand in front of the toilet.
The Lid automatically opens
If the lid does not open, move at least 1 foot away from the
toilet, wait 10 seconds, and then stand in front of the toilet
again. The lid will automatically open.
●
When the motion detection sensor detects motion, the
"sensor" light on the main unit display will light up.
●
The motion detection sensor detects motion and the
lid opens automatically.
When Sitting on the Toilet Seat
●
When raised with the remote controller and you
do not sit on the toilet seat for at least 6
seconds, the lid will not automatically close.
After using the toilet, move
at least 1 foot away from the
toilet.
The lid will automatically close
after 90 seconds.
●
When the motion detection sensor fails to detect motion,
the "sensor" light on the main unit display will go out.
1
●
Initially, "Auto Open/Close" has been set at "On".
●
When a child uses the toilet, the sensor may not detect anything depending on the standing position,
height etc. In this case, use the remote control to open/close the lid.
18
Motion detection
sensor
1
(lights up)
Motion detection
sensor
(light goes out)
When Standing in Front of the Toilet
●
Raise the toilet seat with the remote
controller. You must stand in front of the
toilet for at least 6 seconds or the lid will not
automatically close.
After using the toilet, move at
least 1 foot away from the
toilet.
The toilet seat and lid will
automatically close after 90
seconds.
●
When the motion detection sensor fails to detect motion, the "sensor" light on the main unit display will go out.
To turn off the Auto OPEN/CLOSE function
Push the desired button
on the remote controller
Push the Auto OPEN/CLOSE button on the
remote controller to stop the Auto
OPEN/CLOSE.
The "
" will disappear from the remote control
●
display.
●
To turn the "
" on again, repeat this operation.
About the Motion detection sensor:
The Motion detection sensor detects when someone stands in front of the toilet.
●
●
The Motion detection sensor projects an infrared light as shown in the figure below.
When someone stands in line with the infrared light, movement is detected by the sensor.
Motion detection sensor
The lid is close
Motion detection
sensor
(light goes out)
No dot is "Off"
A [ ] is "On".
Motion detection sensor
The lid is open
19
Hide quick links:
Advertisement
Table of Contents
