Mr Adjustment - Sony DCR-HC65 Adjusting Manual

3. MR Adjustment

The MR (Magnet resistor) adjustment of the inner focus lens is
carried out automatically. In whichever case, the focus will be
deviated during auto focusing/manual focusing.
Subject Not required
Measurement Point Adjustment remote commander
Measuring Instrument
Adjustment Page F
Adjustment Address 58, 5A to 65
Specified Value1 40 to C0
Specified Value2 03 to 78
Specified Value3 88 to FD
Note1: Make the lens horizontal and perform this adjustment.
Note2: Perform this adjustment before "Flange Back Adjustment".
Note3: The data of page: 0, address: 10 must be "00".
Note4: Check that the data of page: 6, address: 02 is "00". If not, to page:
6, address: 01, set data: 00, and press the PAUSE button.
Switch setting:
1) MODE ......................................................... CAMERA-TAPE
Adjusting method:
Order Page Address Data
1 0 01 01
2 6 01 BD
3 6 02
4 F 5A
5 F 5B
6 F 5C
7 F 5D
8 F 5E
9 F 5F
10 F 60
11 F 61
12 F 62
13 F 63
14 F 64
15 F 65
Note5: The adjustment data will be automatically input to page: F, address:
58, 5A to 65.
Procedure
Set the data.
Set the data, and press PAUSE
button.
Check that the data changes to
"01". (Note5)
Check that the data satisfies the
specified value 1.
Check that the data satisfies the
specified value 1.
Check that the data satisfies the
specified value 1.
Check that the data satisfies the
specified value 1.
Check that the data satisfies the
specified value 2.
Check that the data satisfies the
specified value 3.
Check that the data satisfies the
specified value 2.
Check that the data satisfies the
specified value 3.
Check that the data satisfies the
specified value 2.
Check that the data satisfies the
specified value 3.
Check that the data satisfies the
specified value 2.
Check that the data satisfies the
specified value 3.
Processing after Completing Adjustments:
Order Page Address Data
1 6 01
2 0 01
3
6-23
DCR-HC65
Procedure
00 Set the data, and press PAUSE
button.
00 Set the data.
Turn off the power and turn on
again