Led Status During Charging; Installing Transmitter Batteries - Shure GLXD4 Manual

LED Status During Charging

The following LED states indicate battery status when the transmitter is connected to a charger:
• Green = charging complete
• Green Flashing = battery charge > 90%
• Red = battery charging
• Amber Flashing = battery error, replace battery

Installing Transmitter Batteries

Bodypack Transmitter
1. Move the locking lever to the open position and slide the battery door open.
2. Place the battery into the transmitter.
3. Close the battery door and slide the latch to lock.
Handheld Transmitter
1. Unscrew and remove the battery cover.
2. Place the battery into the transmitter.
3. Replace and tighten the battery cover.
Shure Incorporated
15/34