Challenging Wireless Environments
Some environments are more difficult than others for 2.4 GHz wireless system performance. Additionally, body absorption has
a greater impact in the 2.4 GHz spectrum, compared to the UHF spectrum. The simplest solution in many cases is to reduce
the transmitter to receiver distance such as placing the receivers on the stage with a clear line of sight.
Challenging environments include:
•
Areas with few reflective surfaces such as:
◦
Outdoors
◦
Buildings with very high ceilings
•
3 or more GLX-D receivers in use
•
Strong Wi-Fi presence
•
Competitive 2.4 GHz systems in use
Note: Unlike analog TV band wireless which typically uses the same type of transmissions across manufacturers, all 2.4GHz wireless currently on the market
use different variations of wireless transmission. These differences make it more difficult to mix and match 2.4 GHz from multiple manufacturers successfully,
as can be done with TV band wireless solutions.
Tips and Methods to Improve Wireless System Perfor-
mance
If you encounter interference or dropouts, try the following suggestions:
•
Scan for the best available channel (press the channel button).
•
Reduce transmitter to receiver distance for example, place receivers on stage with a line of sight to the front of the re
ceiver.
•
Change the group for all GLX-D systems:
◦
Single-Chanel System: use Group 4, which is optimized for single-channel use
◦
Multi-Channel System: use Group 2, which is the most robust wireless group
•
Move receiver further away from WiFi access points, computers, or other active 2.4 GHz sources. Recommended dis
tance is a minimum of 3 meters (10 feet).
•
Disable non-critical Wi-Fi on computers, cell phones, and other portable devices
◦
If you plan to use WiFi during a performance, turn on WiFi prior to turning on GLXD and scanning for the best chan
nel.
•
Keep the transmitter and receiver more than 2 meters (6 feet) apart
•
Avoid heavy Wi-Fi traffic activities such as downloading large files or viewing a movie.
•
Locate competitive 2.4 GHz receivers away from each other
•
Avoid placing transmitter and receiver where metal or other dense materials may be present
•
Move the receiver to the top of the equipment rack
•
Keep transmitters more than 2 meters (6 feet) apart - this is less critical at shorter receiver to transmitter distances
Note: If transmitters are within 6 inches of non-GLXD transmitters or microphone cartridges, audible noise is possible.
•
During sound check, mark trouble spots and ask presenters or performers to avoid those areas
•
If there is a known strong source of Wi-Fi and you specifically want to use frequencies within that Wi-Fi channel, use the
following Group/Channel of GLX-D (best option listed first):
◦
Wi-Fi 1: Group 3/Channel 8, Group 3/Channel 4
◦
Wi-Fi 6: Group 3/Channel 7, Group 3/Channel 5
◦
Wi-Fi 11: Group 3/Channel 2, Group 3/Channel 1
Shure Incorporated
19/34