Glxd4 Receiver Controls And Connectors - Shure GLXD4 Manual

GLXD4 Receiver Controls and Connectors

① Antenna
Two antennas per receiver. Antennas pick up the signal from the transmitter.
② RF Status LED
◦ ON = Linked transmitter is on
◦ Flashing = Searching for transmitter
◦ OFF = Linked transmitter off or transmitter unlinked
③ Group Button
Press and hold for two seconds to enable manual group edit.
④ Link Button
Press to manually link receiver to a transmitter or to activate the remote ID function
⑤ Channel
◦ Momentary press to start a channel scan
◦ Press and hold 2 seconds to enable manual channel edit
⑥ LCD Screen
Shure Incorporated
8/34