Hide thumbs Also See for BF200D:
Table of Contents

Advertisement

42ZVL600.book 60 ページ 2018年7月19日 木曜日 午前9時6分
PRE-OPERATION CHECKS
When you check the oil level with the dipstick, you might notice the engine oil
appears milky or the oil level has increased. If you notice either condition,
change the engine oil. See the following table for an explanation of these
conditions.
Operating Method
Running the engine below
• Water condenses in the
3,000 rpm for more than 30%
of the time so the engine does
not warm up.
• Unburned fuel mixes with the
Frequent starting and stopping
without allowing the engine to
warm up.
60
Result
The engine oil deteriorates,
engine and mixes with the oil,
becomes less efficient as a
resulting in a milky
lubricant, and causes an
appearance.
engine malfunction.
oil, increasing the volume of
oil.

Fuel

Check the fuel level and refill if
necessary. Do not fill the fuel tank
above the UPPER LIMIT.
Refer to the boat manufacturer's
Effect
instructions.
Use unleaded gasoline with a
Research Octane Number of 91 or
higher (a Pump Octane Number of 86
or higher). Use of leaded gasoline
may cause damage to the engine.
Never use gasoline that is stale,
contaminated, or mixed with oil.
Avoid getting dirt, dust or water in
the fuel tank.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bf225dBf250d

Table of Contents