Honda BF200D Manual page 51

42ZVL600.book 51 ページ ２０１８年７月１９日 木曜日 午前９時６分
(+) TERMINAL
(–) TERMINAL
RED
BLACK
Connect the battery cables:
1. Connect the cable with the red
terminal cover to the positive (+)
terminal of the battery.
2. Connect the cable with the black
terminal cover to the negative (–)
terminal of the battery.
When more than one outboard motor
is mounted on a boat, connect a
battery to each respective outboard
motors.
• Be sure to connect the (+) side
battery cable first. When
disconnecting the cables,
disconnect the (–) side first then
the (+) side.
• Unless the cables are properly
connected to the terminals, the
starter motor may fail to operate
normally.
INSTALLATION
• Be careful to avoid connecting
the battery in reverse polarity, as
this will damage the
battery-charging system in the
outboard motor.
• Do not disconnect the battery
cables while the engine is
running. Disconnecting the
cables while the engine is
running, will damage the
outboard motor's electrical
system.
• Do not place the fuel tank near
the battery.
51