Honda BF200D Manual page 59

42ZVL600.book 59 ページ ２０１８年７月１９日 木曜日 午前９時６分
SAE 10W-30 is recommended for
general use.
AMBIENT TEMPERATURE
<Inspection and Refilling>
OIL LEVEL DIPSTICK
UPPER
LEVEL
MARK
LOWER
LEVEL
MARK
1. Position the outboard motor
vertically, and remove the engine
cover (see page 57).
2. Remove the oil level dipstick and
wipe with a clean rag.
3. Reinsert the dipstick all the way in,
then pull it out and read the level.
If near or below the lower level
mark, remove the oil filler cap and
fill to the upper level mark with the
recommended oil. Tighten the oil
filler cap securely. Do not
overtighten.
PRE-OPERATION CHECKS
OIL FILLER CAP
When the engine oil is contaminated
or discolored, replace with the fresh
engine oil (see page 118 for
replacement interval and procedure).
4. Install the engine cover and lock it
securely (see page 57).
Do not overfill the engine oil.
Check the engine oil after refilling.
Excessive engine oil as well as the
insufficient oil could cause damage
to the engine.
59