Function Switches (D1 Type) - Honda BF200D Manual

42ZVL600.book 27 ページ ２０１８年７月１９日 木曜日 午前９時６分
FUNCTION SWITCHES
(D1 type)
[+] SWITCH
[-] SWITCH
Function switches are used for
operations in the fast idle mode and
trolling mode.
<Fast Idle Mode>
The fast idle mode is only needed for
starting carbureted outboard models.
The BF200D, BF225D and BF250D
models use programmed fuel
injection so, this mode will not be
needed for starting.
After the engine starts and if the
outside temperature is below
5°C (41°F), the fast idle mode can be
used to accelerate engine warm up.
CONTROLS AND FEATURES
NEUTRAL
FORWARD
Pull up
REMOTE
CONTROL
LEVER
Use the [-] switch and the remote
control lever to adjust the engine
speed without gearshift when
warming up the engine.
Keeping the [-] switch pressed when
the remote control lever is in the
NEUTRAL position, turn the lever
forward. Keep turning the lever
forward. The throttle opens and the
engine speed increases after the lever
passed the shift point.
Note that the gearshift mechanism
does not function when the [-] switch
is pushed once and then released after
the remote control lever is moved.
The control lever does not operate
unless the neutral release lever is
pulled.
REVERSE
NEUTRAL
RELEASE
LEVER
27