Honda BF200D Manual page 130

42ZVL600.book 130 ページ ２０１８年７月１９日 木曜日 午前９時６分
MAINTENANCE
<Battery Cleaning>
1. Disconnect the battery cable at the
battery negative (–) terminal, then
at the battery positive (+) terminal.
2. Remove the battery and clean the
battery terminals and battery cable
terminals with a wire brush or sand
paper.
Clean the battery with a solution of
baking soda and warm water,
taking care not to get the solution
or water in the battery cells. Dry
the battery thoroughly.
130
POSITIVE (+)
–
NEGATIVE ( )
TERMINAL
TERMINAL
3. Connect the battery positive (+)
cable to the battery positive (+)
terminal, then the battery negative
(–) cable to the battery negative (–)
terminal. Tighten the bolts and nuts
securely. Coat the battery
terminals with grease.
CAUTION
When disconnecting the battery
cable, be sure to disconnect at the
battery negative (–) terminal first.
To connect, connect at the
positive (+) terminal first, then at
the negative (–) terminal. Never
dis/connect the battery cable in
the reverse order, or it causes a
short circuit when a tool contacts
the terminals.