Honda BF200D Manual page 44

42ZVL600.book 44 ページ ２０１８年７月１９日 木曜日 午前９時６分
CONTROLS AND FEATURES
Mechanical wire type:
1. Stopping the engine.
2. Setting the gearshift at F or R.
3. Turning the engine switch ON. The
buzzer will sound once.
4. Putting in and pull out the
emergency stop switch clip 5 times
within 20 seconds.
The buzzer will sound once when
the hour counter is reset.
Periodic maintenance is required
when either the operating hours or the
time since last maintenance reaches
the prescribed limit. Therefore,
periodic maintenance may be
required based on the number of
months since the last maintenance
before the alert based on engine
operating hours displays (see
Maintenance Schedule on page 116).
Reset the hour counter whenever
maintenance is performed, whether
based on the time interval or the
number of operating hours.
44
<Operating hour notification timing>
20 80 hours
hours after reset
Start of Notify Notify
operation
<Display>
Steps 1
Outboard
— Engine switch ON
motor
Display Switch ON
Not shown
Maintenance
Maintenance
indication on
indication
display
Every 100 hours
100 hours
after reset
Notify
2 3
Start engine
— —
Shown Shown
Maintenance Maintenance
indication indication
4
Gear at F or R
—
Not shown
Maintenance
indication