Rcom MARU DELUXE PRO Series User Manual page 10

USA & Canada Official Sales & Service https://www.R-Com-Hatcher.com
2. Before use
▶ When the power cord is plugged in and turned on the digits on the temperature and humidity FND appears,
then Temperature and Relative Humidity will increase a little. (Their default value is respectively : 37.5
and RH 45%) A initial smell may be noticed this is to be expected.
Do not connect power supply before the incubator is assembled completely.
Risk of electric shock.
▶ Please check and refill distilled water every 2 days during incubation. Or as needed
(If the water tank is small, please check every day.)
If you use the incubator without adding humidification water or intend to incubate eggs at low humidity under
RH 30%, you must stop the humidification function. Please turn off the humidity function if there is no water
available otherwise the humidity unit will fail, making the machine unuseable.
(When using this function, the alarm for sensing wter drop will go out.)
※ To turn off the Humidification Function : Set humidity under RH 30%.
Using tap water or underground water instead of distilled water in this unit's humidification device
will cause serious debris (scale) to develop. In this case, the inconvenience of frequent cleaning
will occur and when left alone, may become the cause of malfunction or breakage. If you have any
questions regarding such problems, please contact the place of purchase and failure of the device
due to the consumer negligence (due to non-cleaning), even if it occurred with in the free A/S period,
repair charges might occur when repairing , so use of distilled water is highly recommended.
You can buy the 'Distilled water' in your local market, and if you have any question, please contact the shop,
where you purchased your machine.
10
Egg Incubator Hatcher Maru Pro User Manual
(2) How to install this Incubator /
Preparing for Incubation
℃
[Refer to the page 17]
DIGITAL INCUBATOR
(99.5 ℉ )