Table of Contents
Advertisement
2. INSTALLATION
Basic installation
Complete installation
7
6
4
5
4
4
2
1
1 - RPS control unit
2 - Tubular motor (240Vac)
3 - Hand transmitter
4 - Safety edge wireless transmitter
3
2
1
1 - RPS control unit
2 - Tubular motor (240Vac)
8
3 - Hand transmitter
4 - Safety edge wireless transmitter
5 - Alarm wireless sensor
6 - Wireless security keypad
7 - External courtesy light
8 - Alarm buzzer
3
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TVRPS868E01 and is the answer not in the manual?
Questions and answers
Door opens no problem, door will not close, have to wind it down manually.
The TELECO AUTOMATION TVRPS868E01 door may open but not close automatically due to the safety edge being activated or defective. If the floor is uneven, the safety edge can be deactivated using procedure 3.2 in the last part of the closure. Additionally, for the closure to be effective, the command must start from the upper limit switch. If safety devices (except for TB input) are defective or activated, the door can still be operated by holding the command button for more than 5 seconds, switching the control unit to hold-to-run mode.
This answer is automatically generated