TELECO AUTOMATION TVRPS868E01 Installer Instruction Manual page 15

5. TRANSMITTERS DELETION
This operation should be done using the button P2. Please refer to the schematic diagram on page 7 in order
to localize the position on the board.
5.1 Deleting a single transmitter
4x
P2
5.2 Deleting all the transmitters
P2
5x
5.3 Remote deletion of a transmitter
P3 button is
located inside the
3x
transmitter
memorized
Press 3 times P3 button of a
memorized transmitter and keep it
pressed for 2 sec. The buzzer emits a
slow intermittent sound.
keep it pressed
( )
...
intermittent sound
keep it pressed
( 10 s )
...
intermittent sound
intermittent sound
P3
Press the button of the transmitter
to delete within 5 sec.
button to
delete
continuous sound
Press P2 five times and keep it pressed for at
least 10 seconds.
after
The buzzer emits an intermittent sound.
10 seconds
Release the button once the sound becomes
continuous.
continuous sound
to delete
...
< 5 s
15
Press P2 four times and keep it pressed.
The buzzer emits an intermittent sound.
Press the button of the transmitter to delete.
Once the deletion is successfully completed,
the buzzer emits a continuous sound.
continuous
sound
Once the deletion is successfully completed,
the buzzer emits a continuous sound.