Table of Contents
Advertisement
7.
FOLLOW THESE STEPS WHEN BATTERY IS OUTSIDE VEHICLE.
7.1
Check the polarity of the battery posts. The POSITIVE (POS, P, +)
battery post usually has a larger diameter than the NEGATIVE (NEG, N,
-) post.
7.2
Attach at least a 24-inch long 4 gauge (AWG) insulated battery cable to
the NEGATIVE (NEG, N, -) battery post.
7.3
Connect the POSITIVE (RED) charger clip to the POSITIVE (POS, P, +)
post of the battery.
7.4
Position yourself and the free end of the cable you previously attached
to the NEGATIVE (NEG, N, -) battery post as far away from the battery
as possible – then connect the NEGATIVE (BLACK) charger clip to the
free end of the cable.
7.5
Do not face the battery when making the final connection.
7.6
When disconnecting the charger, press the START/STOP (
to turn the output off, disconnect the AC lead, remove the clip from the
cable attached to the negative battery terminal and then remove the clip
from the positive battery terminal.
7.7
A marine (boat) battery must be removed and charged on shore. To
charge it onboard requires equipment specially designed for marine use.
8.
BATTERY CHARGING – AC CONNECTIONS
8.1
Check the polarity of the battery posts. The POSITIVE (POS, P, +)
battery post usually has a larger diameter than the NEGATIVE (NEG, N,
-) post.
8.2
Attach at least a 24-inch long 4 gauge (AWG) insulated battery cable to
the NEGATIVE (NEG, N, -) battery post.
A spark near the battery may
cause a battery explosion. To
reduce the risk of spark near the
battery:
A spark near the battery may cause a battery
explosion. To reduce the risk of spark near
the battery:
9
) button
Advertisement
Table of Contents
