Table of Contents
Advertisement
8.3
Connect the POSITIVE (RED) charger clip to the POSITIVE (POS, P, +)
post of the battery.
8.4
Position yourself and the free end of the cable you previously attached
to the NEGATIVE (NEG, N, -) battery post as far away from the battery
as possible – then connect the NEGATIVE (BLACK) charger clip to the
free end of the cable.
8.5
Do not face the battery when making the final connection.
8.6
When disconnecting the charger, press the START/STOP (
to turn the output off, disconnect the AC lead, remove the clip from the
cable attached to the negative battery terminal and then remove the clip
from the positive battery terminal.
8.7
A marine (boat) battery must be removed and charged on shore. To
charge it onboard requires equipment specially designed for marine use.
9.
MOUNTING INSTRUCTIONS
This charger can be operated on a stable surface either upright or lying down
(brackets not installed). Rubber strips have been provided to help prevent
scratching and denting of the channels. If you would like to permanently mount
the charger, use the following instructions:
10
) button
Advertisement
Table of Contents
