Table of Contents
Advertisement
13.
MAINTENANCE INSTRUCTIONS
13.1.
Before performing maintenance, unplug and disconnect the battery
charger (see sections 6.7 and 7.6).
13.2.
After use, unplug the charger and use a dry cloth to wipe all battery
corrosion and other dirt or oil from the terminals, leads, and the charger
case.
13.3.
After every 100 hours or whenever you see dust accumulating on the fan
blades, you may clean both fan's blades using compressed air.
NOTE:
To avoid potential excessive fan rotation speed, hold the fan still
whilst using the compressed air on the fan blades only. Do not blow dirt
into the fan shaft or bearing. These fans push a lot of air and are
precision balanced. Excessive dirt and grime buildup will cause the fan
to be unbalanced and wear out quickly. If the fans fail, the charger may
overheat and the thermal protection of the charger will shut it down.
13.4.
Ensure that all of the charger components are in place and in good
working condition, including the plastic boots on the battery clips.
13.5.
Servicing does not require opening the unit, as there are no
user-serviceable parts.
14.
STORAGE INSTRUCTIONS
14.1.
Store the charger unplugged, in an upright condition. The lead will still
conduct electricity until it is unplugged from the outlet.
14.2.
Store inside, in a dry, cool place (unless you're using an on-board
Marine Charger).
14.3.
Do not store the clips on the handle, clipped together, on or around
metal, or clipped to cables.
21
Advertisement
Table of Contents
