Sun Microsystems Sun Ray 100 User Manual page 21

Open a terminal window and type:
% /opt/SUNWut/bin/utsettings
2. Select the category, then the setting you want.
Contact your system administrator if you have questions.
Adjusting the Display
The Display Menu, accessed by the buttons on the front of the appliance, enables
you to adjust characteristics of the screen image. Display changes are indicated by
on-screen adjustment icons. Some functions have submenus.
Brightness
Access Function
:
:
Exit Menu
Sun Ray 100 Enterprise Appliance Display Menu
FIGURE 6
To Access the Display Menu
1. With the menu off, push the Menu button to open the menu system and display
the main function menu.
2. Push the Next button to move to the next icon or push the Previous button to
move back to the previous icon. As you move from one icon to another, the
function name changes to reflect the function or group of functions represented
by that icon. See the table below to view a complete list of all the functions
offered by this appliance.
3. Push the Access Function button once to select the adjustment function, then use
the Next and Previous buttons to make your changes. On-screen calibration
numbers show the effect of your adjustment.
Sun Ray 100 Enterprise Appliance User's Guide en-11