Table of Contents
Advertisement
Enter configuration
Field adjustment allows a number of characters n, to be added to or subtracted from the
barcode read. The adjustment can be different for each enabled code type. To define the field
adjustment:
Read the enable field adjustment code:
Select the code type from the Code Identifier Table in Appendix B.
Select the type of adjustment to perform:
right addition
right deletion
Read a number in the range 01 - 32 from the Hex/Numeric Table to define how many
characters to add or delete:
Conditions:
•
Adjustment is only performed on the barcode data, the Code Identifier and Code Length
Transmission fields are not modified by the field adjustment parameter.
•
If the field setting would subtract more characters than exist in the barcode, the
subtraction will take place only to code length 0.
•
You can set up to a maximum of 10 different field adjustments on the same barcode
family or on different barcode families.
Example: To add 4 characters to the right of Standard Code 39 Codes:
enable field adjustment
Read
DATA FORMAT
F
A
IELD
DJUSTMENT
disable field adjustment
enable field adjustment
Code 39
+
Exit and Save Configuration
left addition
left deletion
right addition
+
+
04
21
Advertisement
Table of Contents
