INTRODUCTION TO THE MANUAL
Introduction to the Manual
This manual has been designed to be user friendly. Read it carefully, and follow the
step-by-step instructions to get the best possible printing results.
•
Work very carefully and avoid contact with the hot plate to avoid serious burns.
Keep hands clear of heat platen while closing the press to prevent bruises and
burns.
•
Use your press only on stable, steady and non-slip surfaces.
•
Check the press immediately after unpacking for any transport damage. Allow
the press to stand for several hours at room temperature before using to pre-
vent the formation of
condensation, and thus avoid the risk of a possible short circuit.
•
Operate the press whilst standing, with both hands on the handle provided for
this purpose. The machine should stand at a level that is adapted to the height of
the operator.
•
The optimum operating condition for your press is at a maximum humidity of 70 %,
and an ambient temperature between +15 °C and +50 °C.
•
Should any liquid or solid object get inside the unit, immediately disconnect the
power plug from the wallsocket/outlet, and have the machine checked carefully by
an expert before it is used again.
•
No liability is assumed by the manufacturer for any improper or nonintended
use of the machine resulting in property or personal injury.
HappyFabric
HappyFabric.de
HappyFabric.de
21