Table of Contents
Advertisement
WARRANTY TERMS
Return of the machines manufactured by GSE TexPrint Solutions GmbH for disposal
GSE TexPrint Solutions GmbH agrees to take back all machines manufactured by GSE
TexPrint Solutions GmbH which are clearly marked as manufactured by them. Machines must
be returned in complete condition, at the customer's expense, in order that they can be pro-
perly disassembled and disposed of by GSE TexPrint Solutions GmbH.
WEEE-Reg.-Nr. DE 37926376
Packaging
Please retain the carton and packing materials in order that you can safely pack up the heat
press at a later date should it require transportation.
Prepare
Please ensure that your machine is standing firmly on your counter top. Open the transfer
press completely to carry out set up, until it stops. Place the item to be printed (which should
be flattened and smoothed) on the lower plate. Be careful that when the press is not fully
open as there is a risk of burns. Always strictly observe the printing instructions of the various
materials you use.
Storage
The heat press can be stored open or closed. If you close the heat press to store, reduce the
pressure as much as possible by turning the pressure adjustment knob.
Oil
For maintenance, or when the press squeaks, add a little maintenance oil to the black was-
hers (with silver-colored caps). There are four on each side (two on the lever and two on the
attachment).
HappyFabric
HappyFabric.de
Useable Example
spray.
To spray on the black
washers on both sides.
HappyFabric.de
31
Advertisement
Table of Contents
